|
|
Chapter
09 - Technical Inspection & Bike Specification
- 1 - 2
- 3
F. Foot pegs must be in good condition
with no metal showing and covered with material that will not
damage the racing surface. Teflon, rubber or plastic are acceptable
coverings.
G. Bike must have a full or half
fairing.
H. Numbers must be at least 3”
tall and displayed on the front and both sides of the rear
fairing.
I. Racer must bring safety gear
to technical inspection with their bike.
J. All frames, wheels, and swing
arms must be free of cracks & all welds must be stable.
K. Bikes will be scrutinized according
to the specifications of the class entered.
L. All Hydraulic brake lines must
be safety wired.
|
